Custom Key Settings

You can assign functions to the custom keys to easily start specified functions.

This chapter describes how to operate the custom keys and how to assign functions to the custom keys.

Basic Operation of the Custom Keys

  1. Press the (F1) button, (F2) button, (F3) button, or (F4) button.
  2. The function assigned to each button is executed.

Assigning a Function to a Custom Key

  1. Press the adjustment dial.
  3. The Setting menu appears.
  5. Turn the adjustment dial to select "Preferences" and press the dial.
  6. The Preferences menu appears.
  8. Turn the adjustment dial to select "Custom Key" and press the dial.
  9. The Custom Key menu appears.
  11. Turn the adjustment dial to select the custom key to which the function is assigned, and press the adjustment dial.
  12. The menu for assigning a function appears.
  14. Turn the adjustment dial to select the function to be assigned, and press the adjustment dial.
  15. The function is assigned to the custom key.
  16. Press the (EXIT) button several times.
  17. The Setting menu exits.

Functions that can be Assigned to Custom Keys

Function

Description

S-GAMMA -Quick Check-

Sets the HLG System Gamma of the Quick Check function. See Using the Quick Check function.

EOTF -Quick Check-

Sets the Gamma (EOTF) of the Quick Check function. See Using the Quick Check function.

BRIGHT -Quick Check-

Sets the Brightness of the Quick Check function. See Using the Quick Check function.

BLACK -Quick Check-

Sets the Black Level Lift of the Quick Check function. See Using the Quick Check function.

Off

Disables the custom key.

Input Range

Sets the Input Range function. See Input Range.

Zoom

Sets the Zoom function. See Zoom.

BT.709 Gamut Warning

Sets the BT.709 Gamut Warning function. See BT.709 Gamut Warning.

Luminance Warning

Sets the Luminance Warning function. See Luminance Warning.

Prev. Color Mode

You can return to the previous color mode. This is convenient for checking the differences between two color modes.

Attention

  • When using ColorNavigator 7, it is necessary to reselect the color mode after exiting the software.

Information

You can view the input signal information and color information.

Note

  • You can check the monitor information under Information on the Setting menu.

Time Code

Sets the Time Code function. See (SDI / ST 2110 Settings - Time Code Settings).

Marker听1

Sets the Marker 1 function. See Marker - Marker听1.

Marker听2

Sets the Marker 2 function. See Marker - Marker听2 / Marker听3.

Marker听3

Sets the Marker 3 function. See Marker - Marker听2 / Marker听3.

Center Marker

Sets the Center Marker function. See (Center Marker - Center Marker).

Blue Only

Sets the Blue Only function. See (Blue Only).

Pixel Inspection

Executes the Pixel Inspection function and displays the color information of the pixel at the set coordinates. The coordinates are specified in the "Pixel Inspection" menu in the Setting menu (see Pixel Inspection).