Basic Adjustments/Settings

This chapter describes the basic functions that can be set by pressing the buttons on the front of the monitor.

For advanced adjustment and setting procedures using the Setting menu, see Advanced Adjustments/Settings.

Switch Operation Method

  1. Touch any switch (except ).
  2. The operation guide appears on the screen.

  4. Note

    • Do not directly touch the operation guide that appears on the screen. There are switches below the operation guide that can be touched to perform adjustment/setting.
  5. Touch a switch for adjustment/setting.
  6. The Adjustment/Setting menu appears.
    (A sub menu may also be displayed. In this case, select the item for adjustment/setting using and select .)
  7. Perform adjustment/setting with the switches and select to accept the changes.
  8. Select to exit the menu.

Switching Input Signals

When a monitor has multiple signal inputs, the signal to display on-screen can be changed.

Switching the Display Mode (color mode)

This function allows easy selection of a display mode according to monitor application.

Display Modes

Standard Mode

Adjust color using the monitor's Setting menu.

Color Mode

Purpose

User

See Color Mode Setting Values for detailed setting values for each color mode.

sRGB

Advanced Mode

Adjust the monitor's display using the monitor's color management software "ColorNavigator 7".

Color Mode

Purpose

CAL1

Displays the screen adjusted by ColorNavigator 7.

CAL2

CAL3

CAL4

CAL5

CAL6

CAL7

CAL8

Color Mode Setting Values

Item

Color Mode

User

sRGB

CAL1 / CAL2 / CAL3 / CAL4 / CAL5 / CAL6 / CAL7 / CAL8

Brightness (肠诲/銕�)

200

120

-

Temperature

6500 K

D65

-

Gamma (EOTF)

2.2

sRGB

-

Color Gamut

Native

sRGB

-

Advanced Settings

Hue

0

0

-

Saturation

0

0

-

Gamut Clipping

On

Off

-

Gain

Red

听

-

Green

Calculated from color temperature

-

Blue

听

-

6 Colors

Magenta

Hue

0

0

-

Saturation

0

0

-

Lightness

0

0

-

Red

Hue

0

0

-

Saturation

0

0

-

Lightness

0

0

-

Yellow

Hue

0

0

-

Saturation

0

0

-

Lightness

0

0

-

Green

Hue

0

0

-

Saturation

0

0

-

Lightness

0

0

-

Cyan

Hue

0

0

-

Saturation

0

0

-

Lightness

0

0

-

Blue

Hue

0

0

-

Saturation

0

0

-

Lightness

0

0

-

Note

  • Use ColorNaviagator 7 to set "CAL1 / CAL2 / CAL3 / CAL4 / CAL5 / CAL6 / CAL7 / CAL8".
  • A color mode can be set for each input signal.
  • See Color for details about each item.
  • You can disable specific mode selections. For more information, see Mode Skip.