Attaching/Removing the Stand

Removing the Stand

The stand of this product can be removed.

Attention

  • Since the monitor is heavy, two or more people should work together when carrying the monitor, tilting it down or up, or attaching/removing the stand. Dropping the unit may result in injury or equipment damage.
  • When carrying the monitor, firmly grip the handle on the back of the monitor and the bottom of the screen. Dropping the unit may result in injury or equipment damage.
  • When carrying the monitor, remove the connection cables and optional items beforehand. If the cables get caught or optional items come off during transportation, it may cause injury or malfunction.
  1. Lay the LCD monitor on a soft cloth or cushion spread over a stable and flat surface with the LCD panel surface facing down.

  2. Attention

    • Make sure that it does not interfere with the surface the stand is placed on.
  4. Remove the stand cover (left/right) using your hand.
  6. Remove the screws that secure the stand (M4, two each on the left and right sides) and remove the stand (left/right).

Attaching a Monitor Arm

A separate monitor arm (or stand) can be attached to this product by removing the stand.

When attaching an arm or stand, the installable orientations and movement range (tilt angle) are as follows:

Attention

  • When attaching an arm or stand, follow the instructions of the respective User's Manual.
  • When using an arm or stand by another manufacturer, confirm the following points in advance and select one that conforms to the VESA standard:
  • Clearance between screw holes: 200 mm x 200 mm 100 mm x 100 mm
  • Arm or stand VESA mount dimensions: 240 mm x 240 mm or less
  • Plate thickness: 2.6 mm
  • Strong enough to support weight of the monitor unit (excluding the stand) and attachments such as cables
  • Connect the cables after attaching an arm or stand.
  • The monitor, arm, and stand are heavy. Dropping them may result in injury or equipment damage.
  • Check periodically that the screws are tight enough. If the screws are not tight enough, the monitor may come unattached. This may be the cause of injury or damage.
  1. Lay the LCD monitor on a soft cloth or cushion spread over a stable and flat surface with the LCD panel surface facing down.
  2. Remove the cover of the monitor.
  4. Attach the arm or stand to the monitor.
  5. For installation, use commercially available screws that meet the following conditions:
  6. When installing with screw hole spacing 200 mm x 200 mm on the mounting area
  7. Nominal diameter: M6
  8. Length: Between 11.6 mm and 13.4 mm (if using washers, add the washer thickness)
  9. When installing with screw hole spacing 100 mm x 100 mm on the mounting area
  10. Nominal diameter: M4
  11. Length: Between 9.8 mm and 12.4 mm (if using washers, add the washer thickness)

Attaching the Original Stand

  1. Lay the LCD monitor on a soft cloth or cushion spread over a stable and flat surface with the LCD panel surface facing down.
  2. Remove the fixing screws on the optional arm (or optional stand), and detach the optional arm (or optional stand).
  3. Attach the original monitor cover.
  5. Attach the original stand (left/right) and secure it with the original screws (M4, two each on the left and right sides).
  7. Attach the original stand cover (left/right).
    Align the tabs (4 places) on the stand cover with the corresponding holes on the main body, then firmly press them straight in.