Administrator Settings
This chapter describes how to configure monitor operation using the "Administrator Settings" menu.
Basic Operations of the "Administrator Settings" Menu
- Press "OFF" on the remote control to turn off the monitor.
- Immediately after pressing
, press "ON" to turn on the monitor. - The "Administrator Settings" menu appears.
- Press
to select an item to set, and press "ENTER". - The Adjustment/Setting menu appears.
- Set with
, then press "ENTER". - The "Administrator Settings" menu appears.
- Select "Apply", then press "ENTER".
- The settings are applied and the "Administrator Settings" menu exits.
Attention
- The language (English) of the "Administrator Settings" menu cannot be changed.
Note
- You can also adjust/set the items using the operation switch on the front of the monitor.
- Touch
to turn off the monitor. - While touching the leftmost switch, touch for more than 2 seconds to turn on the monitor.
The "Administrator Settings" menu appears.
Functions of the "Administrator Settings" Menu
Auto Input Detection
Settings: "On" / "Off"
This function automatically recognizes the connector through which PC signals are input, and displays images on the screen accordingly.
- "On"
- When the monitor is connected to multiple PCs, if a specific PC enters power saving mode or no signals are input to the monitor, the connector is automatically changed to another one to which signals are input.
- "Off"
- When selecting the input signal manually, select this setting. Select the input signal to display using
on the remote control or the operation switch (
) on the front of the monitor. For details, see Switching Input Signals.
Note
- Does not function in PbyP / PinP display.
- This product automatically recognizes the connector through which PC signals are input, and displays images on the screen accordingly regardless of whether this function is set to On or Off just after the main power switch on the back of the monitor has been turned on.
- When this function is set to "On", the monitor only enters the power saving mode when signals are not input from any PC.
Compatibility Mode
Settings: "On" / "Off"
If you want to avoid the following phenomena, set this function to "On":
- The positions of windows and icons are shifted when the monitor is turned off/on or has returned from the power saving mode.
- Even when the mouse or keyboard are used, the PC does not return from sleep.
- When the power to the monitor is turned off, a device connected to the USB downstream port does not work, or power is not supplied to the connected device.
- When the power to the monitor is turned off, power is not supplied to devices connected to the USB-C connector.
Ethernet
Settings: "On" / "Off"
You can switch between enabling and disabling of the LAN port of the monitor.
- "On"
- Enables the LAN port and allows network connections from PCs connected with USB-C.
- "Off"
- Disables the LAN port.
Signal Format - USB-C
Settings: "4K 60Hz / USB 2.0" / "4K 30Hz / USB 5Gbps"
The type of signal that can be displayed on the monitor can be changed. Try changing this setting if the input signal is not displayed correctly or the intended display does not show.
Note
- The default setting is "4K 60Hz / USB 2.0" (maximum USB transfer speed is 480 Mbps). When connecting to a PC that supports USB 3.0 or later USB standards, set it to "4K 30Hz / USB 5Gbps" (maximum USB transfer speed is 5Gbps).
Signal Format - HDMI 1 / HDMI 2
Settings: "4K 30Hz" / "4K 60Hz" (default setting)
The type of signal that can be displayed on the monitor can be changed. Try changing this setting if the input signal is not displayed correctly or the intended display does not show.
Note
- If it does not display correctly, try changing it to "4K 30Hz".
On-Screen Logo
Settings: "On" / "Off"
When the monitor is turned on, the EIZO logo and certification standard logo appears on the screen.
When this function is set to "Off", the logos do not appear.
Key Lock
Settings: "Off" / "Menu" / "All"
In order to prevent changes to settings, the operation switches on the front of the monitor can be locked.
- "Off" (default setting)
- Enables all switches.
- "Menu"
- Locks the
switch. - "All"
- Locks all switches except the power switch.
Note
- You can operate the remote control even if Key Lock is set.
Factory Reset
Restores the settings to the factory default settings.