Introduction
This chapter describes the features of the monitor and the name of each control.
Features
Supports video display and power supply with a single USB Type-C庐 (hereinafter "USB-C庐") cable connection
- Equipped with a USB-C connector
- Supports the transmission of video signals (DisplayPort鈩� Alt Mode) as well as power supply (USB Power Delivery).
- It supplies a maximum of 70 W of power to a connected notebook PC when used as an external monitor.
Note
- To display video signals, the connected device must support transmission of video signals (DisplayPort Alt Mode).
- To use the charging function, the connected device must support device charging by using USB Power Delivery.
- Only when the following USB cables are used, a maximum of 70 W of power can be supplied:
- CC200SS-5A (Included)
- CC100 (Optional accessory)
- Connected devices can be charged even when the monitor is in power saving mode.
Wide variety of input ports
- Equipped with 3 input ports
- Equipped with three video input ports (HDMI, DisplayPort, USB-C) that allows connection to various external devices.
Various functions that support work
- User-defined custom key function
- Work efficiency can be improved by assigning frequently used functions to the buttons on the front of the monitor.
See Custom Key Settings - Equipped with a USB Hub function
- By connecting via USB, peripheral devices that support USB can be used, and smartphones can be charged.
- Displays HDCP (High Bandwidth Digital Protection) protected content
Hassle-free accurate display adjustment
- Compatible with "Quick Color Match" software for easy photo printing and color matching
- Compatible with the "Quick Color Match" software that enables color matching between the monitor screen and photo prints with minimum effort and no complicated settings.
- The latest version of Quick Color Match can be downloaded free of charge from our web site.
(www.eizoglobal.com )
- Compatible with color management software "ColorNavigator 7"
- "ColorNavigator 7", a dedicated software for adjusting ColorEdge is available.
- The latest version of ColorNavigator 7 can be downloaded free of charge from our web site (the dedicated sensor required for calibration is an optional accessory).
(www.eizoglobal.com )
Controls and Functions
Front
| Displays menus. Operate the switches according to the operation guide (see Basic Operation of the Setting Menu). |
| Turns the power on or off. Touching the switch turns on the power. The switch indicator lights up when you turn the power on. The indicator color differs depending on the monitor's operation status. White: Normal operation mode Orange: Power saving mode OFF: Main power/power off |
Rear
| This handle is used for transportation. |
| Complies with Kensington's MicroSaver security system. |
| Use this button to remove the monitor from the stand. |
| Connects to a peripheral USB device (see Using the USB Hub Function).
|
| Holds the monitor cables. |
| Adjusts the height and angle (tilt and swivel) of the monitor. The monitor can also be rotated vertically. |
| Turns the main power on or off.
|
| Connects the power cord. |
| Connects to an external device with HDMI output. |
| Connects to an external device with DisplayPort output. |
| Connects to an external device with USB-C output. This also transmits the USB signal that is necessary for using software that requires a USB connection. |
| Connect using USB cable when using software that requires a USB connection. The blue connector. |
: USB 5Gbps
: USB 2.0
: On, 
: Off- An optional arm (or optional stand) can be attached by removing the stand section.