Mounting Method

Attention

  • Before using EX5, ColorNavigator 7 must be installed. For details, refer to the User's Manual of ColorNavigator 7.
  • Wipe off dust, dirt, etc. from the monitor screen before installing EX5.
  • Please mount it so that there is no gap between the sensor and the monitor screen.
  • Be careful not to damage the monitor screen with the sensor.
  1. Connect the monitor to the computer using the USB cable provided with the monitor.
    For detailed connection instructions, refer to the Setup Guide.
  2. Connect EX5 to the USB downstream port on the computer or monitor.
  3. Slowly slide the weight to adjust to a balanced position while suspending the sensor unit in the measurement position of the monitor.